We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

The improved performance in terms of data rate, latency and overall operation provided by HSDPA required new data channels.

The new HSUPA channels were required to carry the data but in addition to this channels were needed to provide control and signalling.

Although HSUPA is an enhancement to the 3G UMTS uplink, channels new data channels were needed in both the up and down links. The reason fo there being new channels in the downlink as well is so that the required control and signalling needed to manage the uplink.

Uplink channels

A variety of new channels have been introduced for HSUPA to enable the system to carry the high speed data. These new channels are:

  • E-DCH, the Enhanced Dedicated Channel: This HSUPA uplink channel carries on block of data for each TTI (Transmission Time Interval). The E-DCH can be configured simultaneously with one or more DCHs. In this way high speed data transmission can occur at the same time and on the same UE as services that use the standard DCH.

    As a low latency (delay) is one of the key requirements for the high speed uplink a short TTI (Transmission Time Interval) of 2 ms is supported in addition to one of 10 ms. The short TTI allows for rapid adaptation of transmission parameters and it reduces the end-user delays.

    There is a balance to be determined for the TTI. It is found that the physical layer processing is proportional to the amount of data to be processed, and accordingly the shorter the TTI the lower the level of data per TTI. However for applications requiring relatively low data rates, the overheads required with a 2 ms TTI may be unduly high. In these circumstances a longer TTI is more appropriate.

    The E-DCH is mapped to a set of E-DCH Dedicated Physical Data Channels.

  • E-DPDCH (Enhanced Dedicated Physical Data Channel): This HSUPA uplink channel carries uplink user data. Each UE can transmit up to four E-DPDCH channels at a spreading factor of SF256 to SF2. The number of E-DPDCHs s and their spreading factors are varied according to the instantaneous data rate required. As an example of a typical scenario, to achieve a 2 Mbps rate - the raw data rate of early devices - two SF2 E-DPDCHs were required.
  • E-DPCCH (Enhanced Dedicated Physical Control Channel): This channel carries the control data required by the Node B to decode the uplink channels including the E-DCH Transport Format Combination Indicator which indicates the block size, retransmission sequence number, etc.

Downlink channels

A variety of new channels have been introduced for HSUPA to enable the system to carry the high speed data. These new channels are:

  • E-AGCH (Enhanced Absolute Grant Channel): This HSUPA channel provides the absolute limit of the power resources, i.e. the serving grant, that the UE may use. The channel is used to send scheduling grants from the scheduler to the UE to control when and what data rate the UE should be used. The E-AGCH is only sent by one NodeB regardless of the number that the UE is communicating with. The NodeB used is the one that has the main responsibility for the scheduling operation. The E-AGCH is typically used for large changes in data rate.
  • E-RGCH (Enhanced Relative Grant Channel): This channel is used to move the UE serving grant up, down or remain the same. It is generally used for relatively small changes during an ongoing data transmission. Large changes are handled by the E-AGCH.
  • E-HICH (Enhanced DCH Hybrid ARQ Indicator Channel): This HSUPA channel is used to provide the acknowledgement of the UE data received by the Node B.

These new HSUPA channels anabled the increased data speeds as well as reduced latency to be provided in the uplink.

Wireless & Wired Connectivity Topics:
Mobile Communications basics2G GSM3G UMTS4G LTE5GWiFiIEEE 802.15.4DECT cordless phonesNFC- Near Field CommunicationNetworking fundamentalsWhat is the CloudEthernetSerial dataUSBSigFoxLoRaVoIPSDNNFVSD-WAN
Return to Wireless & Wired Connectivity

Watch the video: Comparing HSPA, HSPA+, and LTE (May 2022).


  1. Phantasos

    Hello, I went to your project from Yandex and Kaspersky began to swear at viruses = (

  2. Isen

    Nada add another item

  3. Zulugis

    absolutely agrees with the previous sentence

  4. Didier

    I am am excited too with this question. Prompt, where I can find more information on this question?

  5. Stancliff

    In this nothing in there and I think this is a very good idea. Fully agree with her.

Write a message